Skip to Content
Kaye Lites Inc.
Kaye Lites Inc.
Services
Online Store
Manufacturers
About & Contact
Forms
0
0
Shop Now
Kaye Lites Inc.
Kaye Lites Inc.
Services
Online Store
Manufacturers
About & Contact
Forms
0
0
Shop Now
Services
Online Store
Manufacturers
About & Contact
Forms
Shop Now
Shop LiteGear LiteDimmer Plus AC400 DMX, 400W, AC
400.jpg Image 1 of
400.jpg
400.jpg

LiteGear LiteDimmer Plus AC400 DMX, 400W, AC

$1,540.00
Part No: LD-PLUS-AC400-DMX

LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.

Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)

Quantity:
Add To Cart
Part No: LD-PLUS-AC400-DMX

LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.

Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)

Part No: LD-PLUS-AC400-DMX

LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all Plus+CompatibleHybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.

Specifications:
POWER RATING: 400W
VOLTAGE INPUT: 90~305VAC, 50/60 Hz (C14 Connector)
VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
DATA PROTOCOL: DMX512
DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
CONTROLS: On-Board ON-OFFSwitch, 5-Pin DMX In and Pass Thru, Local Manual Control
SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
AMBIENT TEMP. OPERATION: -10° to +50° C (14° to 122° F)
IP RATING: IP20
PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)

You Might Also Like

litegear-litemat-plus-8-led-complete-kit-hybrid-9.jpg litegear-litemat-plus-8-led-complete-kit-hybrid-9.jpg
LiteGear LiteMat Plus 8 LED Complete Kit - Hybrid AC DUO
Sale Price:$4,799.00 Original Price:$5,670.00
sale
PS-12V-4A-F-2.jpg
LiteGear Power Supply, Desktop, 12V DC, 4A, 48W
$24.65
Screen-Shot-2019-07-04-at-9.57.46-AM.png
LiteGear LiteTile LiteBox Diffusion, 48" x 24"
$97.00
LMK-FOUR-HY-KIT-2T.jpg LMK-FOUR-HY-KIT-2T.jpg LMK-FOUR-HY-KIT-2T.jpg LMK-FOUR-HY-KIT-2T.jpg
LiteGear LED LiteMat 4 S2 Complete Unit Kit, HYBRID 40" x 21"
$2,299.00
1852_1.jpg 1852_1.jpg 1852_1.jpg 1852_1.jpg 1852_1.jpg 1852_1.jpg 1852_1.jpg 1852_1.jpg
Chimera Panel Lantern Pro Kit Powered by LiteGear 24 x 24"
$2,464.00

Kaye Lites Inc. | 781-932-0005 | shop@kayelites.com | 34 Holton Street Woburn, MA 01801

Quote Request
We do not charge you at the time of checkout because availability and pricing can change very quickly. PLEASE NOTE: There is a minimum order of $50 per manufacturer.
Once your order is placed we check stock with the manufacturer(s) and send you a quote with all the most accurate information(lead time, shipping, etc.) before collecting your payment.
Name *
Phone
Address *
Payment Method
We offer a 2% Cash Discount for orders paid by check or wire transfer.

Thank you for your order. We are gathering information about your product(s).

You will receive an e-mail detailing next steps and updating you on stock and shipping availability as soon as we hear back from the manufacturer.