K5600 HMI Joker-Bug 200W HMI Kit AC/DC 30v Belt

$3,190.00
Part No: K0200JB+3

The output of the Joker-Bug 200 can be compared to a 750/1000 Watt quartz fixture, but with a power draw of only 3 Amps. It has become a standard for small interiors, interviews, documentaries and car shots. The system will travel and operate in 110 and 220 Volt environments as well as on 24/30 Volt belts or packs with a Slimverter 200 or 400 (a dedicated 200 Watt Slimverter is available to accommodate two Anton Bauer ProPac). The PAR type design was preferred for its spot to flood ration (80 to 1), compactness (no focusing), ease of use and efficiency through diffusing material. The popular set of four lenses (3xPAR36 and a Frosted Fresnel) and barndoor will help to control the beam patterns from 5 degrees to 65 degrees. The "Bug-Lite" configuration is designed to fill evenly a Lantern or any size Lightbank, making it the perfect light for interviews. Its lightweight allows it to hang safely at the end of a boom arm.

Joker-Bug 200 Kit Includes:
  • 1ea. JOKER-BUG 200W head
  • 1ea. Lamp MSR/SE 200W, 5600K, 200hrs
  • 1ea. Electronic power supply,110V/240V, 50/60 Hz AC-DC
  • 1ea. BEAMER, Optical accessory
  • 1ea. Extension cable 25 feet
  • 1ea. Fresnel Frosted lens with ring
  • 1ea. Super Wide Flood lens with ring
  • 1ea. Wide Flood lens with ring
  • 1ea. Medium Flood lens with ring
  • 1ea. Four l eaf Barndoor
  • 1ea. Frosted Glass Beaker
  • 1ea. Carrying case with lens case
Product Specifications
  • Lamp Housing: Aluminum casting, high temperature black epoxy, striker compartment is clear anodized.
  • Safety Glass Beaker: Borosilicate UV filter tempered.
  • Yoke: 5/8"Baby size receptacle, Aluminum casting black epoxy finish. Large brake area for use of front end lightbanks,
    speed rings, louvers and lanterns.
  • Lamp: MSR 200 HR, 5600 Kelvin, 200 hours life.
  • Power Supply: Electronic, square wave flicker free AC input: 90-132 Volt or by sliding selector
  • Switch: 180- 265V. 50 or 60 Hz. Dual function ON/OFF push button switch. Completely silent (convection cooled).
  • Connectors: Veam quarter turn quick locking.
  • Extension cable: 25, 8 feet attached to the head.
  • BEAMER housing: Solid one piece machined aluminum, with replaceable ears. Clear anodized.
  • Reflector: 3 3/4 diameter specular parabolic. Aluminum 90% reflectance electrolytically coated.
  • Accessory size: 5"Total Weight in lbs: 33.00
Total Weight in lbs: 35.00
Kit Size in inches: 18x13x8.5

New Joker Yoke Foot
Cast Aluminum yoke foot enables 3 position grip possibilities at 0, 45 and 90 degree angles.
Quantity:
Add To Cart
Part No: K0200JB+3

The output of the Joker-Bug 200 can be compared to a 750/1000 Watt quartz fixture, but with a power draw of only 3 Amps. It has become a standard for small interiors, interviews, documentaries and car shots. The system will travel and operate in 110 and 220 Volt environments as well as on 24/30 Volt belts or packs with a Slimverter 200 or 400 (a dedicated 200 Watt Slimverter is available to accommodate two Anton Bauer ProPac). The PAR type design was preferred for its spot to flood ration (80 to 1), compactness (no focusing), ease of use and efficiency through diffusing material. The popular set of four lenses (3xPAR36 and a Frosted Fresnel) and barndoor will help to control the beam patterns from 5 degrees to 65 degrees. The "Bug-Lite" configuration is designed to fill evenly a Lantern or any size Lightbank, making it the perfect light for interviews. Its lightweight allows it to hang safely at the end of a boom arm.

Joker-Bug 200 Kit Includes:
  • 1ea. JOKER-BUG 200W head
  • 1ea. Lamp MSR/SE 200W, 5600K, 200hrs
  • 1ea. Electronic power supply,110V/240V, 50/60 Hz AC-DC
  • 1ea. BEAMER, Optical accessory
  • 1ea. Extension cable 25 feet
  • 1ea. Fresnel Frosted lens with ring
  • 1ea. Super Wide Flood lens with ring
  • 1ea. Wide Flood lens with ring
  • 1ea. Medium Flood lens with ring
  • 1ea. Four l eaf Barndoor
  • 1ea. Frosted Glass Beaker
  • 1ea. Carrying case with lens case
Product Specifications
  • Lamp Housing: Aluminum casting, high temperature black epoxy, striker compartment is clear anodized.
  • Safety Glass Beaker: Borosilicate UV filter tempered.
  • Yoke: 5/8"Baby size receptacle, Aluminum casting black epoxy finish. Large brake area for use of front end lightbanks,
    speed rings, louvers and lanterns.
  • Lamp: MSR 200 HR, 5600 Kelvin, 200 hours life.
  • Power Supply: Electronic, square wave flicker free AC input: 90-132 Volt or by sliding selector
  • Switch: 180- 265V. 50 or 60 Hz. Dual function ON/OFF push button switch. Completely silent (convection cooled).
  • Connectors: Veam quarter turn quick locking.
  • Extension cable: 25, 8 feet attached to the head.
  • BEAMER housing: Solid one piece machined aluminum, with replaceable ears. Clear anodized.
  • Reflector: 3 3/4 diameter specular parabolic. Aluminum 90% reflectance electrolytically coated.
  • Accessory size: 5"Total Weight in lbs: 33.00
Total Weight in lbs: 35.00
Kit Size in inches: 18x13x8.5

New Joker Yoke Foot
Cast Aluminum yoke foot enables 3 position grip possibilities at 0, 45 and 90 degree angles.
Part No: K0200JB+3

The output of the Joker-Bug 200 can be compared to a 750/1000 Watt quartz fixture, but with a power draw of only 3 Amps. It has become a standard for small interiors, interviews, documentaries and car shots. The system will travel and operate in 110 and 220 Volt environments as well as on 24/30 Volt belts or packs with a Slimverter 200 or 400 (a dedicated 200 Watt Slimverter is available to accommodate two Anton Bauer ProPac). The PAR type design was preferred for its spot to flood ration (80 to 1), compactness (no focusing), ease of use and efficiency through diffusing material. The popular set of four lenses (3xPAR36 and a Frosted Fresnel) and barndoor will help to control the beam patterns from 5 degrees to 65 degrees. The "Bug-Lite" configuration is designed to fill evenly a Lantern or any size Lightbank, making it the perfect light for interviews. Its lightweight allows it to hang safely at the end of a boom arm.

Joker-Bug 200 Kit Includes:
  • 1ea. JOKER-BUG 200W head
  • 1ea. Lamp MSR/SE 200W, 5600K, 200hrs
  • 1ea. Electronic power supply,110V/240V, 50/60 Hz AC-DC
  • 1ea. BEAMER, Optical accessory
  • 1ea. Extension cable 25 feet
  • 1ea. Fresnel Frosted lens with ring
  • 1ea. Super Wide Flood lens with ring
  • 1ea. Wide Flood lens with ring
  • 1ea. Medium Flood lens with ring
  • 1ea. Four l eaf Barndoor
  • 1ea. Frosted Glass Beaker
  • 1ea. Carrying case with lens case
Product Specifications
  • Lamp Housing: Aluminum casting, high temperature black epoxy, striker compartment is clear anodized.
  • Safety Glass Beaker: Borosilicate UV filter tempered.
  • Yoke: 5/8"Baby size receptacle, Aluminum casting black epoxy finish. Large brake area for use of front end lightbanks,
    speed rings, louvers and lanterns.
  • Lamp: MSR 200 HR, 5600 Kelvin, 200 hours life.
  • Power Supply: Electronic, square wave flicker free AC input: 90-132 Volt or by sliding selector
  • Switch: 180- 265V. 50 or 60 Hz. Dual function ON/OFF push button switch. Completely silent (convection cooled).
  • Connectors: Veam quarter turn quick locking.
  • Extension cable: 25, 8 feet attached to the head.
  • BEAMER housing: Solid one piece machined aluminum, with replaceable ears. Clear anodized.
  • Reflector: 3 3/4 diameter specular parabolic. Aluminum 90% reflectance electrolytically coated.
  • Accessory size: 5"Total Weight in lbs: 33.00
Total Weight in lbs: 35.00
Kit Size in inches: 18x13x8.5

New Joker Yoke Foot
Cast Aluminum yoke foot enables 3 position grip possibilities at 0, 45 and 90 degree angles.
K5600 HMI Joker2 800W Zoom HMI PAR 1-Light Kit
$7,560.00
K5600 HMI Evolution Kit - 1 Joker 200W
$2,190.00
K5600 HMI Joker2 1600W HMI PAR 1-Light Kit
$9,860.00
Evolution Kit - 1 Alpha 200W
$2,190.00
K5600 HMI Joker-Bug 200W HMI Kit AC/DC for Anton Bauer
$3,190.00