Desisti LEONARDO 10HP High Power- LED FRESNEL-230W - Tungsten
Part No: F10T.MOHP
Super LED F10 HP “High Power”
Led Power 230W - Consumption 250W - PFC 0,96
LED Fresnel SPOTLIGHT CRI greater than 90
White light, Tungsten balanced Correlated Colour Temperature
IP23 rated: “Rain Protected”
Includes:
- 10" diameter Fresnel lens
- Built In Universal Power Supply 120-230-240V 50/60Hz DMX controlled.
- 10 ft power cable with bare ends Mod. 5403.212
- XLR 5 Pin DMX IN & OUT PANEL MOUNTED CONNECTORS.
- 230W LED with Tungsten Balanced Correlated Color Temperature (CCT)
- 4 leaf barndoor Mod. 326.110
- color frame Mod. 327.100
- Manual Operated Yoke Mod. 320.110.40 - Black Tools Free C-Clamp Mod. 91.210 DMX cable is not included, to be ordered separately
OVERVIEW
The Super LED F10 HP is the HIGH POWER version of the high efficiency Super LED F10 Fresnel lens spotlight by DE SISTI and includes:
• the De Sisti Internationally Patented optical system for LED FRESNELS and Plano Convex Optics.
• It is available with either Tungsten (3.200°K) or Daylight (5.600°K) Balanced CCT (Correlated ColorTemperature), in both cases with a CRI higher than 95 and both in Manual or Pole operated versions.
• It is using 230W High CRI - COB LED ARRAYs instead of the 165W ones and such a Power Increase is matching with the Light Output Performances increase.
• The Fixture is rated for IP23 and it is ideal for Location Work, it can be use under the RAIN and it has been tested for minus 20° C ambient temperature operation.
• It is DMX Controlled from 0 to 100% with a super smooth Dimming and a negligible variation of Colour Temperature while controlling the Light intensity.
• The lighting Performances of the Tungsten Balanced CCT are similar from medium to full flood those of a 2kW tungsten Fresnels, while the Daylight Balanced CCT is equivalent to a 700W. The fixture combines the classical SPOT/FLOOD beam control on an equivalent FOCUS RANGE to a
conventional lamp fresnel, with an excellent barn door cutting. It utilizes Standard accessories from the DE SISTI range of equivalent Fresnel Lens size, such as Barndoor, Colour Frame, Cones, scrims.
FEATURES
• 250 mm. (10â€) diameter high quality, shock resistant Borosilicate glass Fresnel lens on spring supports.
• Rugged and Lightweight Carbon Steel housing with low glare black epoxy powder coating, with internal double walls and reinforces.
• High efficiency Self Stabilizing Active Cooling: Automatic, thermal stabilization of the LED operating temperature is managed by an internal thermal sensor and CPU, variable speed fan and heat sink to maintain the LED Array’s constant temperature at a maximum of 65°C. The hydro dynamic bearing fan operates silently with a very low RPM.
• Special Patented Optics for LED Technology.
• Steel cable driven focus mechanism which guides Teflon bushings supported LED ENGINE along 2 rods. This ensures smooth operation during focusing, in any tilting position of the fixture. The Teflon bushings also provide a wiping action, which cleans the steel guide rails during focus. The focusing mechanism can be activated from both front and rear of the fixture and the whole spot to flood action is accomplished with 1 and half turn of the focusing knob.
• The unit is equipped with a hinged lens door with wire-guard, it includes accessory holding brackets. One of the 4 brackets has a locking knob and is spring loaded, it can be locked to either safely hold barndoor, color frame and scrims or to be rotated 90° and locked in an open position for fast accessories changes. A double safety accessory bracket with spring loaded catch is available on request to be assembled opposite to the locking knob.
• The accessories are secure regardless of the orientation of the fixture. Accessories have been designed for one hand installation.
• Available with either positive lock manual yokes for comfort and ease of handling, or pole operated yokes which can be used via the lighting pole for Panning and Tilting the lights as well as manually, since the mechanical activators are equipped with clutches.
POWER AND DMX DAISY CHAIN, IP Rated
The Super LED FRESNELS permit both POWER and DMX DAISY CHAIN. In fact each Fixture is respectively equipped with:
DMX SECTION: XLR5 pin Panel Mount Male & Female (DMX IN & OUT with covers for IP rating).
MAINS SUPPLY with PowerCON TRUE1: The powerCON TRUE1 are connectors with breaking capacity (CBC), i.e. they can be connected or disconnected under load or live, 16A max. The connectors and covers are rated IP65.
Part No: F10T.MOHP
Super LED F10 HP “High Power”
Led Power 230W - Consumption 250W - PFC 0,96
LED Fresnel SPOTLIGHT CRI greater than 90
White light, Tungsten balanced Correlated Colour Temperature
IP23 rated: “Rain Protected”
Includes:
- 10" diameter Fresnel lens
- Built In Universal Power Supply 120-230-240V 50/60Hz DMX controlled.
- 10 ft power cable with bare ends Mod. 5403.212
- XLR 5 Pin DMX IN & OUT PANEL MOUNTED CONNECTORS.
- 230W LED with Tungsten Balanced Correlated Color Temperature (CCT)
- 4 leaf barndoor Mod. 326.110
- color frame Mod. 327.100
- Manual Operated Yoke Mod. 320.110.40 - Black Tools Free C-Clamp Mod. 91.210 DMX cable is not included, to be ordered separately
OVERVIEW
The Super LED F10 HP is the HIGH POWER version of the high efficiency Super LED F10 Fresnel lens spotlight by DE SISTI and includes:
• the De Sisti Internationally Patented optical system for LED FRESNELS and Plano Convex Optics.
• It is available with either Tungsten (3.200°K) or Daylight (5.600°K) Balanced CCT (Correlated ColorTemperature), in both cases with a CRI higher than 95 and both in Manual or Pole operated versions.
• It is using 230W High CRI - COB LED ARRAYs instead of the 165W ones and such a Power Increase is matching with the Light Output Performances increase.
• The Fixture is rated for IP23 and it is ideal for Location Work, it can be use under the RAIN and it has been tested for minus 20° C ambient temperature operation.
• It is DMX Controlled from 0 to 100% with a super smooth Dimming and a negligible variation of Colour Temperature while controlling the Light intensity.
• The lighting Performances of the Tungsten Balanced CCT are similar from medium to full flood those of a 2kW tungsten Fresnels, while the Daylight Balanced CCT is equivalent to a 700W. The fixture combines the classical SPOT/FLOOD beam control on an equivalent FOCUS RANGE to a
conventional lamp fresnel, with an excellent barn door cutting. It utilizes Standard accessories from the DE SISTI range of equivalent Fresnel Lens size, such as Barndoor, Colour Frame, Cones, scrims.
FEATURES
• 250 mm. (10â€) diameter high quality, shock resistant Borosilicate glass Fresnel lens on spring supports.
• Rugged and Lightweight Carbon Steel housing with low glare black epoxy powder coating, with internal double walls and reinforces.
• High efficiency Self Stabilizing Active Cooling: Automatic, thermal stabilization of the LED operating temperature is managed by an internal thermal sensor and CPU, variable speed fan and heat sink to maintain the LED Array’s constant temperature at a maximum of 65°C. The hydro dynamic bearing fan operates silently with a very low RPM.
• Special Patented Optics for LED Technology.
• Steel cable driven focus mechanism which guides Teflon bushings supported LED ENGINE along 2 rods. This ensures smooth operation during focusing, in any tilting position of the fixture. The Teflon bushings also provide a wiping action, which cleans the steel guide rails during focus. The focusing mechanism can be activated from both front and rear of the fixture and the whole spot to flood action is accomplished with 1 and half turn of the focusing knob.
• The unit is equipped with a hinged lens door with wire-guard, it includes accessory holding brackets. One of the 4 brackets has a locking knob and is spring loaded, it can be locked to either safely hold barndoor, color frame and scrims or to be rotated 90° and locked in an open position for fast accessories changes. A double safety accessory bracket with spring loaded catch is available on request to be assembled opposite to the locking knob.
• The accessories are secure regardless of the orientation of the fixture. Accessories have been designed for one hand installation.
• Available with either positive lock manual yokes for comfort and ease of handling, or pole operated yokes which can be used via the lighting pole for Panning and Tilting the lights as well as manually, since the mechanical activators are equipped with clutches.
POWER AND DMX DAISY CHAIN, IP Rated
The Super LED FRESNELS permit both POWER and DMX DAISY CHAIN. In fact each Fixture is respectively equipped with:
DMX SECTION: XLR5 pin Panel Mount Male & Female (DMX IN & OUT with covers for IP rating).
MAINS SUPPLY with PowerCON TRUE1: The powerCON TRUE1 are connectors with breaking capacity (CBC), i.e. they can be connected or disconnected under load or live, 16A max. The connectors and covers are rated IP65.
Part No: F10T.MOHP
Super LED F10 HP “High Power”
Led Power 230W - Consumption 250W - PFC 0,96
LED Fresnel SPOTLIGHT CRI greater than 90
White light, Tungsten balanced Correlated Colour Temperature
IP23 rated: “Rain Protected”
Includes:
- 10" diameter Fresnel lens
- Built In Universal Power Supply 120-230-240V 50/60Hz DMX controlled.
- 10 ft power cable with bare ends Mod. 5403.212
- XLR 5 Pin DMX IN & OUT PANEL MOUNTED CONNECTORS.
- 230W LED with Tungsten Balanced Correlated Color Temperature (CCT)
- 4 leaf barndoor Mod. 326.110
- color frame Mod. 327.100
- Manual Operated Yoke Mod. 320.110.40 - Black Tools Free C-Clamp Mod. 91.210 DMX cable is not included, to be ordered separately
OVERVIEW
The Super LED F10 HP is the HIGH POWER version of the high efficiency Super LED F10 Fresnel lens spotlight by DE SISTI and includes:
• the De Sisti Internationally Patented optical system for LED FRESNELS and Plano Convex Optics.
• It is available with either Tungsten (3.200°K) or Daylight (5.600°K) Balanced CCT (Correlated ColorTemperature), in both cases with a CRI higher than 95 and both in Manual or Pole operated versions.
• It is using 230W High CRI - COB LED ARRAYs instead of the 165W ones and such a Power Increase is matching with the Light Output Performances increase.
• The Fixture is rated for IP23 and it is ideal for Location Work, it can be use under the RAIN and it has been tested for minus 20° C ambient temperature operation.
• It is DMX Controlled from 0 to 100% with a super smooth Dimming and a negligible variation of Colour Temperature while controlling the Light intensity.
• The lighting Performances of the Tungsten Balanced CCT are similar from medium to full flood those of a 2kW tungsten Fresnels, while the Daylight Balanced CCT is equivalent to a 700W. The fixture combines the classical SPOT/FLOOD beam control on an equivalent FOCUS RANGE to a
conventional lamp fresnel, with an excellent barn door cutting. It utilizes Standard accessories from the DE SISTI range of equivalent Fresnel Lens size, such as Barndoor, Colour Frame, Cones, scrims.
FEATURES
• 250 mm. (10â€) diameter high quality, shock resistant Borosilicate glass Fresnel lens on spring supports.
• Rugged and Lightweight Carbon Steel housing with low glare black epoxy powder coating, with internal double walls and reinforces.
• High efficiency Self Stabilizing Active Cooling: Automatic, thermal stabilization of the LED operating temperature is managed by an internal thermal sensor and CPU, variable speed fan and heat sink to maintain the LED Array’s constant temperature at a maximum of 65°C. The hydro dynamic bearing fan operates silently with a very low RPM.
• Special Patented Optics for LED Technology.
• Steel cable driven focus mechanism which guides Teflon bushings supported LED ENGINE along 2 rods. This ensures smooth operation during focusing, in any tilting position of the fixture. The Teflon bushings also provide a wiping action, which cleans the steel guide rails during focus. The focusing mechanism can be activated from both front and rear of the fixture and the whole spot to flood action is accomplished with 1 and half turn of the focusing knob.
• The unit is equipped with a hinged lens door with wire-guard, it includes accessory holding brackets. One of the 4 brackets has a locking knob and is spring loaded, it can be locked to either safely hold barndoor, color frame and scrims or to be rotated 90° and locked in an open position for fast accessories changes. A double safety accessory bracket with spring loaded catch is available on request to be assembled opposite to the locking knob.
• The accessories are secure regardless of the orientation of the fixture. Accessories have been designed for one hand installation.
• Available with either positive lock manual yokes for comfort and ease of handling, or pole operated yokes which can be used via the lighting pole for Panning and Tilting the lights as well as manually, since the mechanical activators are equipped with clutches.
POWER AND DMX DAISY CHAIN, IP Rated
The Super LED FRESNELS permit both POWER and DMX DAISY CHAIN. In fact each Fixture is respectively equipped with:
DMX SECTION: XLR5 pin Panel Mount Male & Female (DMX IN & OUT with covers for IP rating).
MAINS SUPPLY with PowerCON TRUE1: The powerCON TRUE1 are connectors with breaking capacity (CBC), i.e. they can be connected or disconnected under load or live, 16A max. The connectors and covers are rated IP65.
