Kino Flo 4' 4-Bank Select Fixture
The 4' 4-Bank Fixture houses the lamps and is comprised of a
removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are
held in place with Velcro fasteners. There is a strain relief on the lamp
harness to ensure the connectors don't pull off the lamps during operation.
To get the harness away from the fixture, turn the turn fastener and rotate
counter clockwise to release.
The Harness wiring is color-coded. The same color-code must match at each
end of the lamp for proper operation.
This is a complete fixture head to go with components of a system you may
already have. If your interested in a complete system, which includes
ballast, head cable and backplate, then please look at our Kino Flo Systems.
If your interested in the fixture shell only, they can be found in our Kino
Flo Repair Parts.
Fixture can be used in several configurations:
1) Complete fixture with all components combined
2) "Harness Only" - The wiring harness is removed from the
fixture so that user can build a softbox, hide behind Plexiglass or rig into
tight locations. The wiring harness uses Kino Flo designed lamp connectors
that grab the lamp pins so lamps can be operated independently of the
fixture.
3) "Harness + Reflector" - Same as above - but may want to
use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove
louver to give broad coverage over an area - such as lighting blue and green
screens etc.
Lamps are sold seperately. The fixtures can take a variety of lamps. So they
can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten
source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for
blue and green screen as well as designer colors are available.
The 4' 4-Bank Fixture houses the lamps and is comprised of a
removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are
held in place with Velcro fasteners. There is a strain relief on the lamp
harness to ensure the connectors don't pull off the lamps during operation.
To get the harness away from the fixture, turn the turn fastener and rotate
counter clockwise to release.
The Harness wiring is color-coded. The same color-code must match at each
end of the lamp for proper operation.
This is a complete fixture head to go with components of a system you may
already have. If your interested in a complete system, which includes
ballast, head cable and backplate, then please look at our Kino Flo Systems.
If your interested in the fixture shell only, they can be found in our Kino
Flo Repair Parts.
Fixture can be used in several configurations:
1) Complete fixture with all components combined
2) "Harness Only" - The wiring harness is removed from the
fixture so that user can build a softbox, hide behind Plexiglass or rig into
tight locations. The wiring harness uses Kino Flo designed lamp connectors
that grab the lamp pins so lamps can be operated independently of the
fixture.
3) "Harness + Reflector" - Same as above - but may want to
use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove
louver to give broad coverage over an area - such as lighting blue and green
screens etc.
Lamps are sold seperately. The fixtures can take a variety of lamps. So they
can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten
source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for
blue and green screen as well as designer colors are available.
The 4' 4-Bank Fixture houses the lamps and is comprised of a
removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are
held in place with Velcro fasteners. There is a strain relief on the lamp
harness to ensure the connectors don't pull off the lamps during operation.
To get the harness away from the fixture, turn the turn fastener and rotate
counter clockwise to release.
The Harness wiring is color-coded. The same color-code must match at each
end of the lamp for proper operation.
This is a complete fixture head to go with components of a system you may
already have. If your interested in a complete system, which includes
ballast, head cable and backplate, then please look at our Kino Flo Systems.
If your interested in the fixture shell only, they can be found in our Kino
Flo Repair Parts.
Fixture can be used in several configurations:
1) Complete fixture with all components combined
2) "Harness Only" - The wiring harness is removed from the
fixture so that user can build a softbox, hide behind Plexiglass or rig into
tight locations. The wiring harness uses Kino Flo designed lamp connectors
that grab the lamp pins so lamps can be operated independently of the
fixture.
3) "Harness + Reflector" - Same as above - but may want to
use the reflector to give more punch and direction to the light.
4) Can use Louver to give direction to the light or remove
louver to give broad coverage over an area - such as lighting blue and green
screens etc.
Lamps are sold seperately. The fixtures can take a variety of lamps. So they
can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten
source using Kino Flo KF32 or KF29 lamps. A variety of visual effects for
blue and green screen as well as designer colors are available.
