Mole 2k Tungsten Par
$4,045.50
Part No: 6731
The Mole Richardson 2K Tungsten PAR is based on the design of the widely popular Daylite HMI PARS.
The combination of the high-efficiency parabolic reflector and axial (on its side) orientation of the conventional tungsten lamp yields a fixture with performance of more than twice its nominal wattage.
Optional lenses are available to narrow or "flood-out" the luminaries' beam of light, while a knob on the back of the housing offers fine adjustment within the beam parameters of the selected lens.
The 120V fixture features a hinged, locking front door for quick lamp change as well as a 5/8" (16 mm) "baby" receiver and stainless steel safety screen. Variable accessory clip positions can be located at either 90° or 45°. Also included are an attached 7-conductor cable with male Veam connector and a 25' 12/3 Edison extension. The head accepts Mole 10 1/8" (25.7 cm) accessories.
The Mole Richardson 2K Tungsten PAR is based on the design of the widely popular Daylite HMI PARS.
The combination of the high-efficiency parabolic reflector and axial (on its side) orientation of the conventional tungsten lamp yields a fixture with performance of more than twice its nominal wattage.
Optional lenses are available to narrow or "flood-out" the luminaries' beam of light, while a knob on the back of the housing offers fine adjustment within the beam parameters of the selected lens.
The 120V fixture features a hinged, locking front door for quick lamp change as well as a 5/8" (16 mm) "baby" receiver and stainless steel safety screen. Variable accessory clip positions can be located at either 90° or 45°. Also included are an attached 7-conductor cable with male Veam connector and a 25' 12/3 Edison extension. The head accepts Mole 10 1/8" (25.7 cm) accessories.
- Lenses
- Optional interchangeable lenses are available to vary the beam spread from narrow to super-wide.
- Structural Integrity
- Single body casting design for increased cooling, input cable management, one-touch 4th clip and dual purpose skids/handles.
- Accessory Mount
- Adjustable accessory points for either 90° or 45° operation.
- HEAD: Type 6731 2,000 Watt Tungsten Par®
- RATING: 120 volts, A.C. or D.C., 20 amps max.2,000 watts max.
- SOCKET: G38, Heavy duty electrical grade porcelain body with friction type bi-posts brass inserts.
- SWITCH: 20 amp, 120 volt heavy duty, double pole. Mounted in trough.
- CABLE: Attached 25 ft. Type SO, 3 conductor #12 AWG. (when ordering specify type of plug required).
- HEAD CONSTRUCTION: Rugged construction of cast and sheet aluminum.
- YOKE: Aluminum tubing and cast aluminum trunnions with 5/8" dia. Baby Receiver.
- REFLECTOR: Highly polished aluminum Brytal finished parabolic reflector.
- FINISH: Clear Anodized Aluminum/Maroon Powder Coated Enamel.
- SIZE: 11 1/4" x 11 1/2" x 23" (with yoke). 11 1/4" x 11 1/2" x 18" (without yoke).
- HEAD WEIGHT: 20 lbs. (w/yoke & cable).
- BEAM CONTROL: Five accessory lenses (not included), used individually, change the beam pattern from Narrow to Extra Wide Flood. The beam pattern created by the lenses may be rotated within the diffuser clips for vertical or horizontal beam orientation. Further spot to flood adjustments can be made using the focus knob on the rear of the fixture.
Quantity:
Part No: 6731
The Mole Richardson 2K Tungsten PAR is based on the design of the widely popular Daylite HMI PARS.
The combination of the high-efficiency parabolic reflector and axial (on its side) orientation of the conventional tungsten lamp yields a fixture with performance of more than twice its nominal wattage.
Optional lenses are available to narrow or "flood-out" the luminaries' beam of light, while a knob on the back of the housing offers fine adjustment within the beam parameters of the selected lens.
The 120V fixture features a hinged, locking front door for quick lamp change as well as a 5/8" (16 mm) "baby" receiver and stainless steel safety screen. Variable accessory clip positions can be located at either 90° or 45°. Also included are an attached 7-conductor cable with male Veam connector and a 25' 12/3 Edison extension. The head accepts Mole 10 1/8" (25.7 cm) accessories.
The Mole Richardson 2K Tungsten PAR is based on the design of the widely popular Daylite HMI PARS.
The combination of the high-efficiency parabolic reflector and axial (on its side) orientation of the conventional tungsten lamp yields a fixture with performance of more than twice its nominal wattage.
Optional lenses are available to narrow or "flood-out" the luminaries' beam of light, while a knob on the back of the housing offers fine adjustment within the beam parameters of the selected lens.
The 120V fixture features a hinged, locking front door for quick lamp change as well as a 5/8" (16 mm) "baby" receiver and stainless steel safety screen. Variable accessory clip positions can be located at either 90° or 45°. Also included are an attached 7-conductor cable with male Veam connector and a 25' 12/3 Edison extension. The head accepts Mole 10 1/8" (25.7 cm) accessories.
- Lenses
- Optional interchangeable lenses are available to vary the beam spread from narrow to super-wide.
- Structural Integrity
- Single body casting design for increased cooling, input cable management, one-touch 4th clip and dual purpose skids/handles.
- Accessory Mount
- Adjustable accessory points for either 90° or 45° operation.
- HEAD: Type 6731 2,000 Watt Tungsten Par®
- RATING: 120 volts, A.C. or D.C., 20 amps max.2,000 watts max.
- SOCKET: G38, Heavy duty electrical grade porcelain body with friction type bi-posts brass inserts.
- SWITCH: 20 amp, 120 volt heavy duty, double pole. Mounted in trough.
- CABLE: Attached 25 ft. Type SO, 3 conductor #12 AWG. (when ordering specify type of plug required).
- HEAD CONSTRUCTION: Rugged construction of cast and sheet aluminum.
- YOKE: Aluminum tubing and cast aluminum trunnions with 5/8" dia. Baby Receiver.
- REFLECTOR: Highly polished aluminum Brytal finished parabolic reflector.
- FINISH: Clear Anodized Aluminum/Maroon Powder Coated Enamel.
- SIZE: 11 1/4" x 11 1/2" x 23" (with yoke). 11 1/4" x 11 1/2" x 18" (without yoke).
- HEAD WEIGHT: 20 lbs. (w/yoke & cable).
- BEAM CONTROL: Five accessory lenses (not included), used individually, change the beam pattern from Narrow to Extra Wide Flood. The beam pattern created by the lenses may be rotated within the diffuser clips for vertical or horizontal beam orientation. Further spot to flood adjustments can be made using the focus knob on the rear of the fixture.
Part No: 6731
The Mole Richardson 2K Tungsten PAR is based on the design of the widely popular Daylite HMI PARS.
The combination of the high-efficiency parabolic reflector and axial (on its side) orientation of the conventional tungsten lamp yields a fixture with performance of more than twice its nominal wattage.
Optional lenses are available to narrow or "flood-out" the luminaries' beam of light, while a knob on the back of the housing offers fine adjustment within the beam parameters of the selected lens.
The 120V fixture features a hinged, locking front door for quick lamp change as well as a 5/8" (16 mm) "baby" receiver and stainless steel safety screen. Variable accessory clip positions can be located at either 90° or 45°. Also included are an attached 7-conductor cable with male Veam connector and a 25' 12/3 Edison extension. The head accepts Mole 10 1/8" (25.7 cm) accessories.
The Mole Richardson 2K Tungsten PAR is based on the design of the widely popular Daylite HMI PARS.
The combination of the high-efficiency parabolic reflector and axial (on its side) orientation of the conventional tungsten lamp yields a fixture with performance of more than twice its nominal wattage.
Optional lenses are available to narrow or "flood-out" the luminaries' beam of light, while a knob on the back of the housing offers fine adjustment within the beam parameters of the selected lens.
The 120V fixture features a hinged, locking front door for quick lamp change as well as a 5/8" (16 mm) "baby" receiver and stainless steel safety screen. Variable accessory clip positions can be located at either 90° or 45°. Also included are an attached 7-conductor cable with male Veam connector and a 25' 12/3 Edison extension. The head accepts Mole 10 1/8" (25.7 cm) accessories.
- Lenses
- Optional interchangeable lenses are available to vary the beam spread from narrow to super-wide.
- Structural Integrity
- Single body casting design for increased cooling, input cable management, one-touch 4th clip and dual purpose skids/handles.
- Accessory Mount
- Adjustable accessory points for either 90° or 45° operation.
- HEAD: Type 6731 2,000 Watt Tungsten Par®
- RATING: 120 volts, A.C. or D.C., 20 amps max.2,000 watts max.
- SOCKET: G38, Heavy duty electrical grade porcelain body with friction type bi-posts brass inserts.
- SWITCH: 20 amp, 120 volt heavy duty, double pole. Mounted in trough.
- CABLE: Attached 25 ft. Type SO, 3 conductor #12 AWG. (when ordering specify type of plug required).
- HEAD CONSTRUCTION: Rugged construction of cast and sheet aluminum.
- YOKE: Aluminum tubing and cast aluminum trunnions with 5/8" dia. Baby Receiver.
- REFLECTOR: Highly polished aluminum Brytal finished parabolic reflector.
- FINISH: Clear Anodized Aluminum/Maroon Powder Coated Enamel.
- SIZE: 11 1/4" x 11 1/2" x 23" (with yoke). 11 1/4" x 11 1/2" x 18" (without yoke).
- HEAD WEIGHT: 20 lbs. (w/yoke & cable).
- BEAM CONTROL: Five accessory lenses (not included), used individually, change the beam pattern from Narrow to Extra Wide Flood. The beam pattern created by the lenses may be rotated within the diffuser clips for vertical or horizontal beam orientation. Further spot to flood adjustments can be made using the focus knob on the rear of the fixture.
