Matthews Cam Tank

$1,799.99

Part No: 417013

Low & Dutch Shots with Fluid PAN & Tilt Capability.

Matthews CAM Tank is designed to accept all large format camera plates or direct mount to any large or medium format camera equipped with 3/8"-16 mounting holes The CAM Tank was designed for extremely low shots, without taking away your ability to pan and tilt the camera. It is also used to achieve Dutch angles when mounted to a fluid head, or shots designed to be pointed straight down off of a fluid head on a tripod or jib. The bottom of the plate has 17 strategically placed 3/8''-16 tapped holes spaced 1'' apart, complying with Motion picture industry standards The system is CNC machined out of 6061 T-6 aluminum, stainless steel hardware. The pan bearing uses a machined poyoxymethyene, delrin disk, which self-lubricates and has an endurance rating 100x more than any plastic. The tilt system uses 4 premium NSK deep grooved ball bearings (made in Japan). Both pan and tilt functions come with brakes for lock-off shots and camera safety.

Pan Range 350 Degrees
Tilt Range 30 degrees in each direction
Weight Capacity 180 lbs (82kg)
Minimum Camera Height 4" (101mm)
Length and Width 10"x7" (254mm x 177mm)
Total Weight in Case 15 lbs (7kg) CAM Tank only 10 lbs (4.5k9)

The CAM Tank System includes:
[2] Camera/fluid head tie down knobs & a hard plastic case with adjustable carrying strap

*Camera in photos not included in sale*

Quantity:
Add To Cart

Part No: 417013

Low & Dutch Shots with Fluid PAN & Tilt Capability.

Matthews CAM Tank is designed to accept all large format camera plates or direct mount to any large or medium format camera equipped with 3/8"-16 mounting holes The CAM Tank was designed for extremely low shots, without taking away your ability to pan and tilt the camera. It is also used to achieve Dutch angles when mounted to a fluid head, or shots designed to be pointed straight down off of a fluid head on a tripod or jib. The bottom of the plate has 17 strategically placed 3/8''-16 tapped holes spaced 1'' apart, complying with Motion picture industry standards The system is CNC machined out of 6061 T-6 aluminum, stainless steel hardware. The pan bearing uses a machined poyoxymethyene, delrin disk, which self-lubricates and has an endurance rating 100x more than any plastic. The tilt system uses 4 premium NSK deep grooved ball bearings (made in Japan). Both pan and tilt functions come with brakes for lock-off shots and camera safety.

Pan Range 350 Degrees
Tilt Range 30 degrees in each direction
Weight Capacity 180 lbs (82kg)
Minimum Camera Height 4" (101mm)
Length and Width 10"x7" (254mm x 177mm)
Total Weight in Case 15 lbs (7kg) CAM Tank only 10 lbs (4.5k9)

The CAM Tank System includes:
[2] Camera/fluid head tie down knobs & a hard plastic case with adjustable carrying strap

*Camera in photos not included in sale*

Part No: 417013

Low & Dutch Shots with Fluid PAN & Tilt Capability.

Matthews CAM Tank is designed to accept all large format camera plates or direct mount to any large or medium format camera equipped with 3/8"-16 mounting holes The CAM Tank was designed for extremely low shots, without taking away your ability to pan and tilt the camera. It is also used to achieve Dutch angles when mounted to a fluid head, or shots designed to be pointed straight down off of a fluid head on a tripod or jib. The bottom of the plate has 17 strategically placed 3/8''-16 tapped holes spaced 1'' apart, complying with Motion picture industry standards The system is CNC machined out of 6061 T-6 aluminum, stainless steel hardware. The pan bearing uses a machined poyoxymethyene, delrin disk, which self-lubricates and has an endurance rating 100x more than any plastic. The tilt system uses 4 premium NSK deep grooved ball bearings (made in Japan). Both pan and tilt functions come with brakes for lock-off shots and camera safety.

Pan Range 350 Degrees
Tilt Range 30 degrees in each direction
Weight Capacity 180 lbs (82kg)
Minimum Camera Height 4" (101mm)
Length and Width 10"x7" (254mm x 177mm)
Total Weight in Case 15 lbs (7kg) CAM Tank only 10 lbs (4.5k9)

The CAM Tank System includes:
[2] Camera/fluid head tie down knobs & a hard plastic case with adjustable carrying strap

*Camera in photos not included in sale*

Manfrotto Pixi Evo Table Top Tripod - red
$52.99
Modern T Handle Knob 5/16 Male Thread - NON BRANDED
Sale Price:$53.23 Original Price:$64.13
sale
Modern Camera Wedge Plate 0-90°
Sale Price:$668.36 Original Price:$805.25
sale
Modern Mitchell Castle Nut
Sale Price:$73.06 Original Price:$88.03
sale
Cardellini Low-Hat (LH)
Sale Price:$492.99 Original Price:$547.48
sale