Cineo LB4-160 Lightblade Edge 2-Blade
Individual light engines are the key
component to the modular LED system that the Lightblade product line builds its
foundation on. At 48 inches wide by 2 1/2 inches deep, the individual Lightblades
bring you both versatility and a low profile lighting option that can
efficiently and discreetly light even the darkest and tightest corners of your
set. The patented light blade engine provides users with the ability to put RGB
color on reference quality white light in a single or laddered studio fixture.
This type of technology is HSV - Hue Saturation Value - layering color on top of
white light. This means that different shades, tints, and tones can be achieved
easily without affecting the color hue, making for more faithful representations
of a particular color on camera
Simple, sleek modular design provides flexibility to use blades individually and
to use the same light engine in larger format fixtures. This modular design is
vital to the Cineo patent pending Zone Control feature found exclusively in
LightBlade products. Zone Control offers users the ability to control pairs of
blades autonomously of each other to bring a further degree of control to the
entire fixture.
Cineo Full Gamut Five Color (2700, 6500, Red, Green, Blue) LED chips allow users
to create reference quality white light with the ability to overlay fully
saturated color essentially eliminating the need for costly gels. This process
is in essence an extension to HSV in that it permits tunable CCT visible only to
the camera.
Cineo has been widely recognized among the leaders in solid state lighting
design for their superior color rendering, specifically in the R9 value.
LightBlade will boast a 95 average CRI at 3200K & 5600K while maintaining a CRI
over 96 in the R9 value.
Each LightBlade has a 50W draw with an impressive punch of over 12 F/C at 10' or
approximately 60 lumens per watt. Each blade is flicker free to 5,000 FPS.
The Lightblade offers a completely silent, passive cooling operation.
In addition to energy savings, the ability to layer color on top of quality
white light gives users the ability to digitally gel any color desired, saving
money on costly gels and on the labor spent skinning gel frames. Users are
guaranteed to save on valuable production time by making lighting scheme changes
instantaneously, allowing DPs to explore creative options without the
inconvenience and time involved in adjusting lighting instruments.
2-Blade Kit Includes
- Lightblade 4' (2)
- Lightblades DMX Module (1)
- lb 120w Power Supply (1)
- IEC Locking Power Cable (1)
- Lightblade 2-Blade Mounting Plate (1)
- LB RJ45 Terminator (1)
- LB RJ50 Terminator (1)
- Twist-On Plate w/ Mounting System (1)
Individual light engines are the key
component to the modular LED system that the Lightblade product line builds its
foundation on. At 48 inches wide by 2 1/2 inches deep, the individual Lightblades
bring you both versatility and a low profile lighting option that can
efficiently and discreetly light even the darkest and tightest corners of your
set. The patented light blade engine provides users with the ability to put RGB
color on reference quality white light in a single or laddered studio fixture.
This type of technology is HSV - Hue Saturation Value - layering color on top of
white light. This means that different shades, tints, and tones can be achieved
easily without affecting the color hue, making for more faithful representations
of a particular color on camera
Simple, sleek modular design provides flexibility to use blades individually and
to use the same light engine in larger format fixtures. This modular design is
vital to the Cineo patent pending Zone Control feature found exclusively in
LightBlade products. Zone Control offers users the ability to control pairs of
blades autonomously of each other to bring a further degree of control to the
entire fixture.
Cineo Full Gamut Five Color (2700, 6500, Red, Green, Blue) LED chips allow users
to create reference quality white light with the ability to overlay fully
saturated color essentially eliminating the need for costly gels. This process
is in essence an extension to HSV in that it permits tunable CCT visible only to
the camera.
Cineo has been widely recognized among the leaders in solid state lighting
design for their superior color rendering, specifically in the R9 value.
LightBlade will boast a 95 average CRI at 3200K & 5600K while maintaining a CRI
over 96 in the R9 value.
Each LightBlade has a 50W draw with an impressive punch of over 12 F/C at 10' or
approximately 60 lumens per watt. Each blade is flicker free to 5,000 FPS.
The Lightblade offers a completely silent, passive cooling operation.
In addition to energy savings, the ability to layer color on top of quality
white light gives users the ability to digitally gel any color desired, saving
money on costly gels and on the labor spent skinning gel frames. Users are
guaranteed to save on valuable production time by making lighting scheme changes
instantaneously, allowing DPs to explore creative options without the
inconvenience and time involved in adjusting lighting instruments.
2-Blade Kit Includes
- Lightblade 4' (2)
- Lightblades DMX Module (1)
- lb 120w Power Supply (1)
- IEC Locking Power Cable (1)
- Lightblade 2-Blade Mounting Plate (1)
- LB RJ45 Terminator (1)
- LB RJ50 Terminator (1)
- Twist-On Plate w/ Mounting System (1)
Individual light engines are the key
component to the modular LED system that the Lightblade product line builds its
foundation on. At 48 inches wide by 2 1/2 inches deep, the individual Lightblades
bring you both versatility and a low profile lighting option that can
efficiently and discreetly light even the darkest and tightest corners of your
set. The patented light blade engine provides users with the ability to put RGB
color on reference quality white light in a single or laddered studio fixture.
This type of technology is HSV - Hue Saturation Value - layering color on top of
white light. This means that different shades, tints, and tones can be achieved
easily without affecting the color hue, making for more faithful representations
of a particular color on camera
Simple, sleek modular design provides flexibility to use blades individually and
to use the same light engine in larger format fixtures. This modular design is
vital to the Cineo patent pending Zone Control feature found exclusively in
LightBlade products. Zone Control offers users the ability to control pairs of
blades autonomously of each other to bring a further degree of control to the
entire fixture.
Cineo Full Gamut Five Color (2700, 6500, Red, Green, Blue) LED chips allow users
to create reference quality white light with the ability to overlay fully
saturated color essentially eliminating the need for costly gels. This process
is in essence an extension to HSV in that it permits tunable CCT visible only to
the camera.
Cineo has been widely recognized among the leaders in solid state lighting
design for their superior color rendering, specifically in the R9 value.
LightBlade will boast a 95 average CRI at 3200K & 5600K while maintaining a CRI
over 96 in the R9 value.
Each LightBlade has a 50W draw with an impressive punch of over 12 F/C at 10' or
approximately 60 lumens per watt. Each blade is flicker free to 5,000 FPS.
The Lightblade offers a completely silent, passive cooling operation.
In addition to energy savings, the ability to layer color on top of quality
white light gives users the ability to digitally gel any color desired, saving
money on costly gels and on the labor spent skinning gel frames. Users are
guaranteed to save on valuable production time by making lighting scheme changes
instantaneously, allowing DPs to explore creative options without the
inconvenience and time involved in adjusting lighting instruments.
2-Blade Kit Includes
- Lightblade 4' (2)
- Lightblades DMX Module (1)
- lb 120w Power Supply (1)
- IEC Locking Power Cable (1)
- Lightblade 2-Blade Mounting Plate (1)
- LB RJ45 Terminator (1)
- LB RJ50 Terminator (1)
- Twist-On Plate w/ Mounting System (1)
